EQUIPMENT AUCTION - Metal Fabrication, Trucks, Truck Lift, Shop Tools, Breathing Air Compressors

After a successful 38 years in the fire apparatus service business, Mr. Ed Newton, owner of LSI Inc., Fire & Rescue Equipment Sales & Service, has made the decision to retire. Damewood Auctioneers has been contracted to sell the Metal Fabrication Equipment, Trucks, Heavy Truck Lift, Shop Tools, Breathing Air Compressors, and Parts to close out Mr. Newton's business.  Live and Online Bidding Available on ALL LOTS.

Bid Online!

Want to participate in our auction? Bid online or download our app to bid and receive notifications about all of our auctions!

BID ONLINE NOW!
View All Photos

EQUIPMENT AND TOOL AUCTION

Saturday, July 25, 2020 at 9:00AM

LSI, Inc. 520 Jack Enders Blvd #400A, Berryville, VA 22611

Live and Online Bidding Available on All Lots

After a successful 38 years in the fire apparatus service business, Mr. Ed Newton, owner of LSI Inc., Fire & Rescue Equipment Sales & Service, has made the decision to retire. Damewood Auctioneers has been contracted to sell the Metal Fabrication Equipment, Trucks, Heavy Truck Lift, Shop Tools, Breathing Air Compressors, and Parts to close out Mr. Newton's business.

CLICK HERE TO VIEW THE CATALOG, REGISTER AND BID IN THIS AUCTION. PLEASE NOTE THAT YOU WILL HAVE TO REGISTER AGAIN IF YOU DECIDE TO BID LIVE, ON-SITE.

Lot #4

1989 Ford 250 2WD Gas Pickup with Tool Body. VIN#1FTHF25Y2ANA96585
300 6-Cyl Motor,  5 Speed Manual Transmission. Does Have AC.   Odometer shows 73233 but miles exempt because of the age. It has a 5 Digit Odometer, so it exceeds Mechanical Limits. This truck Runs and

5

1996 Chevy 3500 Cargo Van. VIN#1GBH31R6T1040065
350 Engine Automatic, Gas,  275489 Miles. Runs/Drives  Approx. 75000 Miles on Reconditioned Motor.  Service Body Comes With AC Air Compressor, 2 Hose Reels, Waste Oil Reservoir, 15-40 Motor Oil Tank,

6

1996 International 4700 Series Truck VIN # 1HTSLAAM6TH244932
DT466 Motor, Diesel, Automatic , A/C. Miles - 114,358. Service Body, IMC Gas Powered.  18 CFM Air Compressor, 4 Oil Tanks-50 Gallon Each,  1 Motor Oil, 1 ATF , 1 80/90 Rear End Grease, 1 Waste Oil,  E

7

2005 Pontiac Grand Prix 4D Sedan VIN# 2G2WP522151180140
Miles 188,277.  V6 Motor 3800 Series 3. See Pictures for Dents/Scratches.

8

2004 GMC C5500 Diesel Box Truck. VIN#1GDJ5C1164F506560
10'6" Height of Box -  Interior Height- 7 ft.  Miles - 259977, Automatic, Heat and A/C,  2 Oil Tanks, 1 is 15/40, 1 is Waste Oil, Has Reel For Motor Oil,  Lincoln Welder, 225G7 AC/DC. Gas Powered   Ai

9

40 Ft Long SEA Container
 Left Door is Bent and Does not Close Properly Some Rust, See Picture of Stamp for Interior Measurements

10

Bend Pak Model BP-27 Above Ground Lift
Capacity 27000 LB  Voltage 220  Amp 25. Serial # 10032.  See Video for Demonstration. Buyer will need to pay for a crane company to remove. Seller is not responsible for removing this item for the buy

11

Hyster WC-40 Gas Fork Lift
Hours Unknown. Has 4000LB lift Capacity.  Starts, Runs, Drives, Lifts

12

Nissan 50 Propane Forklift
THIS ITEM CAN NOT BE PICKED UP UNTIL MONDAY AFTER THE AUCTION AT 4:00PM -- 3,936  Hours, Chasis Number UJ02-9J-256.  4025 LB Lift Capacity. Lift Height 186 Inches.  Runs Drives and Lifts.

13

Pearson 10 Foot Shearer
SEE VIDEO FOR DEMONSTRATION - Up to 1/4 Inch.   Machine # 5192/5  Capacity 10x25 M.S   / Works. Buyer will need to hire a crane company to remove.

14

Farina Metal Bending Press. Model B/80 40
SEE VIDEO FOR DEMONSTRATION. MM 40 50  x Ton 80. Works. Buyer will need to hire a crane company to remove.

15

Rockewell/Delta Band Saw
Works Model # 28-365

16

Sanborn Magna Force 5HP Two Stage Air Compressor
Seller's employees say this item works.

17

Metal Workshop/Welding Table with Vice
12 Foot by 4 Foot. 1/2 Inch Plate

18

Ridged 535 Pipe Threading Machine
Works.  With Assorted  Dyes and extra head included.

19

South Bend Lathe
Works , 4 Foot Bed 

20

Sharp Programmable End Mill
Seller says this unit works.

21

Welding Tank Cart with Gauges and Hoses
All for one price.

22

Welding Cart with Tanks and Hoses
Tools

23

Lincoiln Square Rig 255 AMP Tig Welder
Hoses And Torch.  Works properly.

24

Hobart IronMan 230 And H200l4-15 Gun
Comes with Spool Gun for Aluminum

25

Dayton 50 Amp Plasma Cutter
Condition Unknown

26

Dayton 20" Drill Press
Works

27

Manley Press
Pressure Limit 60 Tons, this unit is in Poor Condition and the wheel is cracked.

28

Eastwood Versa-Cut 60 Plasma Cutter
Hose included. Seller says this unit works properly.

29

Air American 6.5 Hp 80 Gal Air Compressor
175 PSI. Two Stage and one of the seals has a leak, as photographed.

30

Ingersoll Rand T30 Air Compressor
Works 

31

L & M 6000 PSI 13CFM 10 Horsepower Breathing Air Compressor
 208 Single Phase. This unit is Brand New, and has never been used. 

32

Eagle Air Systems 22 CFM 20 HP 5000 PSI Breathing Air Compressor
3 Phase / 230 Voltage / Bauer Block / Hours 725 . 2 ASME Tanks and Fill Station /  Seller says this unit works

33

Eagle Air Systems 26 CFM / 20 HP Motor Breathing Air Compressor
Handworth Block,  / 230 Volts 3 Phase / 2 ASME Tanks and Fill Station  5000 PSI.  905 Hours. Seller says this unit works.

33b

HyPress 13CFM 10HP 952 hour Compressed Breathing Air Machine
Has an oil leak. Built in January 2005, 460 Hi Voltage motor, three phase. Seller's employee says this machine runs and works, but has an oil leak.

33c

Bauer 9CFM 7.5HP 382 hour Compressed Breathing Air Machine
Has a broken cooling line. This is likely a parts machine, and does not currently run.

33e

Eagle Air Systems 7HP 608 hour, circa 1983, has Bauer block
608 hours. It will start and run, but has a major electrical issue keeping it from working properly.

33f

Bauer 9CFM 7HP 5k PSI compressed breathing air machine
Seller's employee says this unit can run, 3,337 hours. Three phase unit in good working order.

33g

HyPres 13 CFM 10HP Single Phase Compressed breathing air machine
716 hours. Needs work to run properly, oil pressure drops rapidly.

33h

Bauer 13CFM 10HP 3-phase compressed breathing air machine
Does not run because it has an oil pump problem.

33i

Bauer 12 CFM 10HP 555 hour compressed breathing air machine
This has a bad crack in the engine block. Does not run.

34

Bauer 2 Position Fill Station
4 Bank Storage System  Works 

35

Hypres Single Fill Station
Works,  6000 PSI 1 Fill Gauge and 1 Regulator

36

Hypres 1 Position 6000 PSI Compressed Breathing Air Fill Station
6 Bank Gauge System.  Single Air Filled. Works

37

Bauer 12 CFM, 5000 PSI, 230 Volts, 3-Phase Breathing Air Compressor
Runs and Works.  But needs a Valve Job to work properly. See stamp for details and pictures for hours.

38

HyPress Two0-Position Breathing Air Fill Station with Bauer Control Panel
6 Bank Storage.

39

Safe Station X2 Eagle Dual Fill SCBA Fill Station
2 Banks Storage 

40

Hypres 2 Bank Fill Station with 6 Bank Storage System
Works

41

Hypres Single Pod 4 Bank
Works. Single Pod. Remote Fill

42

2013 Bauer Fill Station Model CFS11-2 CH
4 Bank, 2 Fill Safety Interlock S # 145515. 1/2" Steel Safety Barrier 

43

Bauer CFS 2 Pod Breathing Air Fill Station
S # 72222.   2 Fill Station

44

ASME 7000 PSI Tanks - One Price
4 Tanks with Stand. 

45

Six 6000 DOT.Tanks
6000 PSI and Lines and Fittings. Buy the Each, Take all 6. Six Times the Price Bid.

46

4 ASME Tanks
7000 PSI. Buy the Each, Take all 4. Four Times the Money

47

DOT 6000 PSI Tanks
Valve Size 702.  Buy the Each,  2 Times the Price Bid. 

48

DOT 6000 PSI Tanks
Valve size 702. Buy the Each 2 TIMES THE MONEY

49

DOT 6000 PSI Tanks
valve size 702. Buy the Each 2 TIMES THE MONEY

50

DOT 6000 PSI Tanks
Valve size 702. Buy the Each 2 TIMES THE MONEY

51

DOT 6000 PSI Tanks
Valve size 702. Buy the Each 2 TIMES THE MONEY

52

DOT 6000 PSI Tanks
702 Valve Size. Buy the Each 2 TIMES THE MONEY

53

DOT 6000 PSI Tanks
Valve size 702. Buy the Each 2 TIMES THE MONEY

54

DOT 6000 PSI Tanks
702 Valve Size. Buy the Each 2 TIMES THE MONEY

54b

Two bottle ASME Tank Rack
Good shape.

54c

DOT 6-bottle tank rack
Good shape. Clamps not included.

55

2 Sets Of Jack Stands / Single Jack Stand
All For One Money

56

Set of Heavy Duty Jacks Stands
Holds 22 Ton

57

10 Ton Jack Stands
All For One Money

58

Pittsburgh brand Transmission Jack
800 lb. Missing handle

59

Transmission Jack
Low Lift kind

60

Bottle Jack 20 Ton
20 Ton

61

Transmission Jack
See pictures.

62

Hydraulic 2 Stsge Transmissio and Jack
  2200 Lbs

63

Floor Jack
Works

64

Matco Floor Jack
Works

65

Air Floor Jack
red

66

Air Floor Jack
red

100

Daytona 3 Ton Super Duty Floor Jack
Works

101

Utilitech Barrel Fan
works

102

Metal Work Bench with Vice
5 L  x 2 W x  4 H

103

Napa Battery Charger
12 VDC 

104

Floor Jack
Works

105

Omega Lift 20 Ton Air Hydraulic Long Chaisie Service Jack
works

106

Air Hydrualic Axle Jack 22 Tons
Works

107

Crimp Machine Hydraulic
Works/. Bucket of Compressor Oil / Box of Fittings

108

Tank Holders and Fittings
All For One Money

109

13 Bottles Synthetic Oil
Bauer and Seco Brands. All For One Money. / Not all Full Bottles

110

7 Bottles Compression Oil
Bauer and Hypres Brands. All For One Money/. Not All Full Bottles

111

Air Purification Filters
30 in Total / Assorted Sizes  / All For One Money

112

6 Box Lots - Assorted Compressor Parts
All For One Money

113

7 Box Lots High Pressure Regulators / Valves
Assorted Sizes / All For One Money

114

2 Box Lot. - Misc. Filters
All For One Money

115

Regualtors and Valves
All For One Money

116

4 Box Lots - Fittings and Couplers
All For One Money

117

2 Box Lots - High Pressure Gauges
Assorted 

118

Contents of Shelf Lot
All For One Money

119

7 Hand Tools
Shovels, Brooms, Etc

120

Werner 6 Foot Ladder
Yellow

121

Wener 6 Foot Ladder
Green

122

5 Foot Ladder
red

123

Werner 10 Ft Ladder
Blue

124

Werner 10 Foot Ladder
Orange

AUCTION TERMS AND DISCLAIMERS - READ BEFORE BIDDING

R. Craig Damewood, Auctioneer LLC (Auctioneer) offers all lots, items and merchandise sold "As-Is, Where-Is" with no warranties or guarantees either expressed, or implied.  Descriptions are believed to be accurate, and when Auctioneer has knowledge of a defect, it will be disclosed. Auctioneer cannot be responsible for hidden, unknown defects. You, the bidder/buyer must make your own decision to the fitness and condition of any item or lot and bid accordingly.

Preview

You may preview the inventory on Friday, July 24, 2020 from 10AM-3:00PM, and on Auction Day from 7AM-9AM. Due to the COVID-19 outbreak, Buyers, and their associates, must practice social distancing while on the LSI, Inc property and wear face coverings.

Buyer’s Premium & Fees

All Buyers will be assessed an 13% Buyer's Premium, with a 3% discount for all cash and check purchases. All Equipment Facts Bidders will be assessed a 15% Buyer's Premium, with a 3% discount for cash or check. All purchases will be assessed a 6% Virginia State Sales Tax unless Buyer presents Auctioneer with a valid Virginia sales tax exemption at the time of payment. All sales are final with no returns, exchanges, or refunds of any kind. By paying Auctioneer with a credit card, Buyers waive their right to issue a charge-back against Auctioneer. 

All Bids Are Final

All bids recognized by the Auctioneer, the Auctioneers bidding app, and EquipmentFacts.com, are final and constitute a binding contract to purchase between the buyer and the seller. Auctioneer cannot, and will not, remove bids on behalf of bidders.

Removal & Payment

Buyers may pick-up and pay for items on Auction Day up to an hour and a half after the last item has been sold. Pick-up and remove items on Sunday, July 26 from 10AM-3PM, and Monday, July 27 from 8AM-4PM. Under no circumstance can any item be left after 5PM on July 31, 2020 or it will be considered abanonded when LSI, Inc vacates this facility.. Due to the COVID-19 outbreak, Buyers, and their associates, are encouraged to practice social distancing while on LSI, Inc. property and wear face coverings while inside and around others.

For Crane and Transport Services, please Contact:

Road Runner Wrecker Service, Dave Butchert, (703) 450-7555 or david@roadrunnerwreckerservice.com

Brian Omps of Berryville, VA - (540) 678-0063

R. Craig Damewood Auctioneer, LLC
Virginia Auctioneer License #2905000680
Craig Damewood, Ike Swart, Brian Damewood - Auctioneers
703.303.4760 or 540.454.2326